sm6225-common: rootdir: Import rootdir from CLO
* Imported from LA.VENDOR.13.2.1.r1-13800-DIVAR.QSSI16.0
Co-authored-by: Nikita Savchenko <NikitaSavc@yandex.ru>
Co-authored-by: Nahhk <nahhk@proton.me>
Change-Id: I76ab1b81141e0e56b9937da76cf6df47905052e0
diff --git a/rootdir/bin/init.qcom.early_boot.sh b/rootdir/bin/init.qcom.early_boot.sh
new file mode 100755
index 0000000..f74dcce
--- /dev/null
+++ b/rootdir/bin/init.qcom.early_boot.sh
@@ -0,0 +1,504 @@
+#! /vendor/bin/sh
+
+# Copyright (c) 2012-2013,2016,2018-2020 The Linux Foundation. All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in the
+# documentation and/or other materials provided with the distribution.
+# * Neither the name of The Linux Foundation nor
+# the names of its contributors may be used to endorse or promote
+# products derived from this software without specific prior written
+# permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+# NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+
+export PATH=/vendor/bin
+
+# Set platform variables
+if [ -f /sys/devices/soc0/hw_platform ]; then
+ soc_hwplatform=`cat /sys/devices/soc0/hw_platform` 2> /dev/null
+else
+ soc_hwplatform=`cat /sys/devices/system/soc/soc0/hw_platform` 2> /dev/null
+fi
+if [ -f /sys/devices/soc0/soc_id ]; then
+ soc_hwid=`cat /sys/devices/soc0/soc_id` 2> /dev/null
+else
+ soc_hwid=`cat /sys/devices/system/soc/soc0/id` 2> /dev/null
+fi
+if [ -f /sys/devices/soc0/platform_version ]; then
+ soc_hwver=`cat /sys/devices/soc0/platform_version` 2> /dev/null
+else
+ soc_hwver=`cat /sys/devices/system/soc/soc0/platform_version` 2> /dev/null
+fi
+
+if [ -f /sys/class/drm/card0-DSI-1/modes ]; then
+ echo "detect" > /sys/class/drm/card0-DSI-1/status
+ mode_file=/sys/class/drm/card0-DSI-1/modes
+ while read line; do
+ fb_width=${line%%x*};
+ break;
+ done < $mode_file
+elif [ -f /sys/class/graphics/fb0/virtual_size ]; then
+ res=`cat /sys/class/graphics/fb0/virtual_size` 2> /dev/null
+ fb_width=${res%,*}
+fi
+
+log -t BOOT -p i "MSM target '$1', SoC '$soc_hwplatform', HwID '$soc_hwid', SoC ver '$soc_hwver'"
+
+#For drm based display driver
+vbfile=/sys/module/drm/parameters/vblankoffdelay
+if [ -w $vbfile ]; then
+ echo -1 > $vbfile
+else
+ log -t DRM_BOOT -p w "file: '$vbfile' or perms doesn't exist"
+fi
+
+function set_density_by_fb() {
+ #put default density based on width
+ if [ -z $fb_width ]; then
+ setprop vendor.display.lcd_density 320
+ else
+ if [ $fb_width -ge 1600 ]; then
+ setprop vendor.display.lcd_density 640
+ elif [ $fb_width -ge 1440 ]; then
+ setprop vendor.display.lcd_density 560
+ elif [ $fb_width -ge 1080 ]; then
+ setprop vendor.display.lcd_density 480
+ elif [ $fb_width -ge 720 ]; then
+ setprop vendor.display.lcd_density 320 #for 720X1280 resolution
+ elif [ $fb_width -ge 480 ]; then
+ setprop vendor.display.lcd_density 240 #for 480X854 QRD resolution
+ else
+ setprop vendor.display.lcd_density 160
+ fi
+ fi
+}
+
+target=`getprop ro.board.platform`
+case "$target" in
+ "msm7630_surf" | "msm7630_1x" | "msm7630_fusion")
+ case "$soc_hwplatform" in
+ "FFA" | "SVLTE_FFA")
+ # linking to surf_keypad_qwerty.kcm.bin instead of surf_keypad_numeric.kcm.bin so that
+ # the UI keyboard works fine.
+ ln -s /system/usr/keychars/surf_keypad_qwerty.kcm.bin /system/usr/keychars/surf_keypad.kcm.bin
+ ;;
+ "Fluid")
+ setprop vendor.display.lcd_density 240
+ setprop qcom.bt.dev_power_class 2
+ ;;
+ *)
+ ln -s /system/usr/keychars/surf_keypad_qwerty.kcm.bin /system/usr/keychars/surf_keypad.kcm.bin
+ ;;
+ esac
+ ;;
+ "sm6150")
+ case "$soc_hwplatform" in
+ "ADP")
+ setprop vendor.display.lcd_density 160
+ ;;
+ esac
+ case "$soc_hwid" in
+ 365|366)
+ sku_ver=`cat /sys/devices/platform/soc/aa00000.qcom,vidc1/sku_version` 2> /dev/null
+ setprop vendor.media.target.version 1
+ if [ $sku_ver -eq 1 ]; then
+ setprop vendor.media.target.version 2
+ fi
+ ;;
+ 355|369|377|384)
+ setprop vendor.chre.enabled 0
+ ;;
+ *)
+ esac
+ ;;
+ "msm8660")
+ case "$soc_hwplatform" in
+ "Fluid")
+ setprop vendor.display.lcd_density 240
+ ;;
+ "Dragon")
+ setprop ro.sound.alsa "WM8903"
+ ;;
+ esac
+ ;;
+
+ "msm8960")
+ # lcd density is write-once. Hence the separate switch case
+ case "$soc_hwplatform" in
+ "Liquid")
+ if [ "$soc_hwver" == "196608" ]; then # version 0x30000 is 3D sku
+ setprop ro.sf.hwrotation 90
+ fi
+
+ setprop vendor.display.lcd_density 160
+ ;;
+ "MTP")
+ setprop vendor.display.lcd_density 240
+ ;;
+ *)
+ case "$soc_hwid" in
+ "109")
+ setprop vendor.display.lcd_density 160
+ ;;
+ *)
+ setprop vendor.display.lcd_density 240
+ ;;
+ esac
+ ;;
+ esac
+
+ #Set up composition type based on the target
+ case "$soc_hwid" in
+ 87)
+ #8960
+ setprop debug.composition.type dyn
+ ;;
+ 153|154|155|156|157|138)
+ #8064 V2 PRIME | 8930AB | 8630AB | 8230AB | 8030AB | 8960AB
+ setprop debug.composition.type c2d
+ ;;
+ *)
+ esac
+ ;;
+
+ "msm8974")
+ case "$soc_hwplatform" in
+ "Liquid")
+ setprop vendor.display.lcd_density 160
+ # Liquid do not have hardware navigation keys, so enable
+ # Android sw navigation bar
+ setprop ro.hw.nav_keys 0
+ ;;
+ "Dragon")
+ setprop vendor.display.lcd_density 240
+ ;;
+ *)
+ setprop vendor.display.lcd_density 320
+ ;;
+ esac
+ ;;
+
+ "msm8226")
+ case "$soc_hwplatform" in
+ *)
+ setprop vendor.display.lcd_density 320
+ ;;
+ esac
+ ;;
+
+ "msm8610" | "apq8084" | "mpq8092")
+ case "$soc_hwplatform" in
+ *)
+ setprop vendor.display.lcd_density 240
+ ;;
+ esac
+ ;;
+ "apq8084")
+ case "$soc_hwplatform" in
+ "Liquid")
+ setprop vendor.display.lcd_density 320
+ # Liquid do not have hardware navigation keys, so enable
+ # Android sw navigation bar
+ setprop ro.hw.nav_keys 0
+ ;;
+ "SBC")
+ setprop vendor.display.lcd_density 200
+ # SBC do not have hardware navigation keys, so enable
+ # Android sw navigation bar
+ setprop qemu.hw.mainkeys 0
+ ;;
+ *)
+ setprop vendor.display.lcd_density 480
+ ;;
+ esac
+ ;;
+ "msm8996")
+ case "$soc_hwplatform" in
+ "Dragon")
+ setprop vendor.display.lcd_density 240
+ setprop qemu.hw.mainkeys 0
+ ;;
+ "ADP")
+ setprop vendor.display.lcd_density 160
+ setprop qemu.hw.mainkeys 0
+ ;;
+ "SBC")
+ setprop vendor.display.lcd_density 240
+ setprop qemu.hw.mainkeys 0
+ ;;
+ *)
+ setprop vendor.display.lcd_density 560
+ ;;
+ esac
+ ;;
+ "msm8937" | "msm8940")
+ # Set vendor.opengles.version based on chip id.
+ # MSM8937 and MSM8940 variants supports OpenGLES 3.1
+ # 196608 is decimal for 0x30000 to report version 3.0
+ # 196609 is decimal for 0x30001 to report version 3.1
+ # 196610 is decimal for 0x30002 to report version 3.2
+ case "$soc_hwid" in
+ 294|295|296|297|298|313|353|354|363|364)
+ setprop vendor.opengles.version 196610
+ if [ $soc_hwid = 354 ]
+ then
+ setprop vendor.media.target.version 1
+ log -t BOOT -p i "SDM429 early_boot prop set for: HwID '$soc_hwid'"
+ fi
+ ;;
+ 303|307|308|309|320)
+ # Vulkan is not supported for 8917 variants
+ setprop vendor.opengles.version 196608
+ setprop persist.graphics.vulkan.disable true
+ ;;
+ *)
+ setprop vendor.opengles.version 196608
+ ;;
+ esac
+ ;;
+ "msm8909")
+ case "$soc_hwplatform" in
+ *)
+ setprop persist.graphics.vulkan.disable true
+ ;;
+ esac
+ ;;
+ "msm8998" | "apq8098_latv")
+ case "$soc_hwplatform" in
+ *)
+ setprop vendor.display.lcd_density 560
+ ;;
+ esac
+ ;;
+ "sdm845")
+ case "$soc_hwplatform" in
+ *)
+ if [ $fb_width -le 1600 ]; then
+ setprop vendor.display.lcd_density 560
+ else
+ setprop vendor.display.lcd_density 640
+ fi
+ ;;
+ esac
+ ;;
+ "msmnile")
+ case "$soc_hwplatform" in
+ *)
+ if [ $fb_width -le 1600 ]; then
+ setprop vendor.display.lcd_density 560
+ else
+ setprop vendor.display.lcd_density 640
+ fi
+ ;;
+ esac
+ ;;
+ "kona")
+ case "$soc_hwplatform" in
+ *)
+ if [ $fb_width -le 1600 ]; then
+ setprop vendor.display.lcd_density 560
+ else
+ setprop vendor.display.lcd_density 640
+ fi
+ ;;
+ esac
+ ;;
+ "lito")
+ case "$soc_hwid" in
+ 400|440)
+ sku_ver=`cat /sys/devices/platform/soc/aa00000.qcom,vidc1/sku_version` 2> /dev/null
+ if [ $sku_ver -eq 1 ]; then
+ setprop vendor.media.target.version 1
+ fi
+ ;;
+ 434|459)
+ sku_ver=`cat /sys/devices/platform/soc/aa00000.qcom,vidc1/sku_version` 2> /dev/null
+ setprop vendor.media.target.version 2
+ if [ $sku_ver -eq 1 ]; then
+ setprop vendor.media.target.version 3
+ fi
+ ;;
+ esac
+ ;;
+ "bengal")
+ case "$soc_hwid" in
+ 441)
+ setprop vendor.fastrpc.disable.cdsprpcd.daemon 1
+ setprop vendor.gralloc.disable_ubwc 1
+
+ # 196609 is decimal for 0x30001 to report version 3.1
+ setprop vendor.opengles.version 196609
+ ;;
+ 471)
+ #scuba APQ
+ setprop vendor.gralloc.disable_ubwc 1
+ ;;
+ esac
+ ;;
+ "sdm710" | "msmpeafowl")
+ case "$soc_hwplatform" in
+ *)
+ if [ $fb_width -le 1600 ]; then
+ setprop vendor.display.lcd_density 560
+ else
+ setprop vendor.display.lcd_density 640
+ fi
+
+ sku_ver=`cat /sys/devices/platform/soc/aa00000.qcom,vidc1/sku_version` 2> /dev/null
+ if [ $sku_ver -eq 1 ]; then
+ setprop vendor.media.target.version 1
+ fi
+ ;;
+ esac
+ ;;
+ "msm8953")
+ cap_ver = 1
+ if [ -e "/sys/devices/platform/soc/1d00000.qcom,vidc/capability_version" ]; then
+ cap_ver=`cat /sys/devices/platform/soc/1d00000.qcom,vidc/capability_version` 2> /dev/null
+ else
+ cap_ver=`cat /sys/devices/soc/1d00000.qcom,vidc/capability_version` 2> /dev/null
+ fi
+
+ if [ $cap_ver -eq 1 ]; then
+ setprop vendor.media.target.version 1
+ fi
+ ;;
+ #Set property to differentiate SDM660 & SDM455
+ #SOC ID for SDM455 is 385
+ "sdm660")
+ case "$soc_hwplatform" in
+ *)
+ if [ $fb_width -le 1600 ]; then
+ setprop vendor.display.lcd_density 560
+ else
+ setprop vendor.display.lcd_density 640
+ fi
+
+ if [ $soc_hwid -eq 385 ]; then
+ setprop vendor.media.target.version 1
+ fi
+ ;;
+ esac
+ ;;
+ "holi")
+ setprop vendor.media.target_variant "_holi"
+ ;;
+esac
+
+baseband=`getprop ro.baseband`
+#enable atfwd daemon all targets except sda, apq, qcs
+case "$baseband" in
+ "apq" | "sda" | "qcs" )
+ setprop persist.vendor.radio.atfwd.start false;;
+ *)
+ setprop persist.vendor.radio.atfwd.start true;;
+esac
+
+#set default lcd density
+#Since lcd density has read only
+#property, it will not overwrite previous set
+#property if any target is setting forcefully.
+set_density_by_fb
+
+
+# set Lilliput LCD density for ADP
+product=`getprop ro.board.platform`
+
+case "$product" in
+ "msmnile_au")
+ setprop vendor.display.lcd_density 160
+ echo 902400000 > /sys/class/devfreq/soc:qcom,cpu0-cpu-l3-lat/min_freq
+ echo 1612800000 > /sys/class/devfreq/soc:qcom,cpu0-cpu-l3-lat/max_freq
+ echo 902400000 > /sys/class/devfreq/soc:qcom,cpu4-cpu-l3-lat/min_freq
+ echo 1612800000 > /sys/class/devfreq/soc:qcom,cpu4-cpu-l3-lat/max_freq
+ ;;
+ *)
+ ;;
+esac
+case "$product" in
+ "sm6150_au")
+ setprop vendor.display.lcd_density 160
+ ;;
+ *)
+ ;;
+esac
+case "$product" in
+ "sdmshrike_au")
+ setprop vendor.display.lcd_density 160
+ ;;
+ *)
+ ;;
+esac
+
+case "$product" in
+ "msmnile_gvmq")
+ setprop vendor.display.lcd_density 160
+ ;;
+ *)
+ ;;
+esac
+# Setup display nodes & permissions
+# HDMI can be fb1 or fb2
+# Loop through the sysfs nodes and determine
+# the HDMI(dtv panel)
+
+function set_perms() {
+ #Usage set_perms <filename> <ownership> <permission>
+ chown -h $2 $1
+ chmod $3 $1
+}
+
+# check for the type of driver FB or DRM
+fb_driver=/sys/class/graphics/fb0
+if [ -e "$fb_driver" ]
+then
+ # check for mdp caps
+ file=/sys/class/graphics/fb0/mdp/caps
+ if [ -f "$file" ]
+ then
+ setprop vendor.gralloc.disable_ubwc 1
+ cat $file | while read line; do
+ case "$line" in
+ *"ubwc"*)
+ setprop vendor.gralloc.enable_fb_ubwc 1
+ setprop vendor.gralloc.disable_ubwc 0
+ esac
+ done
+ fi
+else
+ set_perms /sys/devices/virtual/hdcp/msm_hdcp/min_level_change system.graphics 0660
+fi
+
+# allow system_graphics group to access pmic secure_mode node
+set_perms /sys/class/lcd_bias/secure_mode system.graphics 0660
+set_perms /sys/class/leds/wled/secure_mode system.graphics 0660
+
+boot_reason=`cat /proc/sys/kernel/boot_reason`
+reboot_reason=`getprop ro.boot.alarmboot`
+if [ "$boot_reason" = "3" ] || [ "$reboot_reason" = "true" ]; then
+ setprop ro.vendor.alarm_boot true
+else
+ setprop ro.vendor.alarm_boot false
+fi
+
+# copy GPU frequencies to vendor property
+if [ -f /sys/class/kgsl/kgsl-3d0/gpu_available_frequencies ]; then
+ gpu_freq=`cat /sys/class/kgsl/kgsl-3d0/gpu_available_frequencies` 2> /dev/null
+ setprop vendor.gpu.available_frequencies "$gpu_freq"
+fi